Grizzly DP13B Five Speed Baby Drill Press

You looking to find the "Grizzly DP13B Five Speed Baby Drill Press" Good news! You can purchase Grizzly DP13B Five Speed Baby Drill Press with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $173.35    

Product Feature

• Drill chuck: 1-64-Inch - 1/2-Inch ; Drilling capacity: 1/2-Inch steel; Motor: 1/3 H.P. TEFC motor 110V; Number of speeds: 5 620 1100 1720 2340 310
• Drilling capacity: 1/2-Inch steel
• Motor: 1/3 H.P. TEFC motor 110V
• Number of speeds: 5

Product Description

Perfect for the small shop this tough little guy won't get in your way when things get cramped. Put it away on the shelf when finished. Fantastic compact solution and great for miniature work. Specifications: • Motor: 1/3 HP 110V single-phase ODP • Swing: 8" • Drill chuck: 1/64"–1/2" • Drilling capacity: 1/2" steel • Spindle travel: 2" • Number of speeds: 5 • Collar size: 1.570" • Precision-ground cast iron table: 6-1/2" sq. • Table swing: 360-Degree • Table tilts: 90-Degree left and right • Overall height: 23" • Approximate shipping weight: 45-Pound.

Grizzly DP13B Five Speed Baby Drill Press Review

Ordered, paid and delivered within a week. I unpacked, and assembled within 2 1/2 hours. The drill
is silent and meets its specification. Just a few tips. I used 4 1/2 inch bolts for the base. Before bolting the column to the base, clean, and try inserting into the headstock. You will note a column stop about 2 1/4 inches inside the headstock. When you are satisified that the column will easily move inside the headstock, place a piece of insulating tape about 2 1/4 inch from top of column. Now bolt the column to base. Next, the table support, mine was slightly rough between the clamping space. Used a fine file. table support then easily slides on the column. Now slide table support on column, then the headstock, the tape will indicate when headstock is fitted correctly.
I fitted a 4" vice to the table support, with one side bolted to the table, using 1 1/2 bolts. It works for me. Support lock handle, mine is fitted to the left hand side!!!!!!
I tapped the chuck using a mallet. The drilling return spring is OK. I did not change the drill depth stops.
Finally, beware, the overall height is 22", but the pulley safety cover requires a further 5 inches.
Easily a five star plus for the product, delivery and cost.

Most of the consumer Reviews tell that the "Grizzly DP13B Five Speed Baby Drill Press" are high quality item. You can read each testimony from consumers to find out cons and pros from Grizzly DP13B Five Speed Baby Drill Press ...