Firepower (FIR1423-1209) Lug / Splicer Crimping Tool

You looking to find the "Firepower (FIR1423-1209) Lug / Splicer Crimping Tool" Good news! You can purchase Firepower (FIR1423-1209) Lug / Splicer Crimping Tool with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $24.44    

Product Feature

• Sold Individually

Product Description

Durable spring loaded mechanism holds Terminal/Lug in place Delivers 1400-1800Lbs.pull-out resistance (Terminal To Cable)

Firepower (FIR1423-1209) Lug / Splicer Crimping Tool Review

This tool is a little bit too rough for insulated Lugs and can be difficult to verify the actual amount of crimp that has been applied to the terminal without a mount. Otherwise, it is of heavy enough constuction to mount on a sturdy surface and crimp as described with hammer blows.Very good value for the price.

Most of the consumer Reviews tell that the "Firepower (FIR1423-1209) Lug / Splicer Crimping Tool" are high quality item. You can read each testimony from consumers to find out cons and pros from Firepower (FIR1423-1209) Lug / Splicer Crimping Tool ...

Otis Law Enforcement Tool Kit

You looking to find the "Otis Law Enforcement Tool Kit" Good news! You can purchase Otis Law Enforcement Tool Kit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $243.99    

Product Feature

• Featuring Otis breech to muzzle cleaning system
• Contains all necessary tools to clean 5.56 and 7.62 rifles and 9mm through 45 caliber handguns along with 12 gauge shotguns
• Includes Gerber Multiplier
• Includes scraper tool kit for cleaning the most critical and hard to reach areas of your firearm
• Includes Stylus LED flashlight with red bulb

Product Description

Contains all the necessary tools to properly clean and maintain all 223/5.56 & 308/7.62mm rifles, 9mm, 40 caliber and 45 caliber handguns along with 12 gauge shotguns. Also included is a Gerber Multi-Plier and Stylus LED red flashlight conveniently packed into this softpack carry case which includes a MOLLE belt attachment.

Otis Law Enforcement Tool Kit Review

Solid piece of equipment for all my firearms. Fits everyone of my handguns rifles and shotguns and the pliers are steller

Most of the consumer Reviews tell that the "Otis Law Enforcement Tool Kit" are high quality item. You can read each testimony from consumers to find out cons and pros from Otis Law Enforcement Tool Kit ...

Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp

You looking to find the "Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp" Good news! You can purchase Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $647.08    

Product Feature

• Adjustable Post Flow (power plasma only) control up to 60 seconds to improve consumable and torch life. Front air pressure adjustment makes adjusting pressure easy and painless. ( PowerPlasma only)
• Front air pressure gauge allows quick verification of air pressure. Over Current and Air Pressure light indicators keep you updated on your units operating condition
• 50AMP 120/220Volt 50/60Hz Plasma Cutter. Cuts 3/8-Inch to 1-Inch

Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp Review

I really wanted to get a higher end model using IGBTs instead of the older MOSFET switching technology on this, but couldn't justify the cost. A second major consideration is the unit, an inverter type, will run on 120vac--still waiting to wire a 240 outlet I can use. I've never used a plasma torch (but do weld), and found it fairly straightforward. The "manual", a half dozen printed pages, that came with it was very poor Chinglish without much relation to anything, but the PDF from the website was thorough and complete.

I did call support, a couple times, mostly to clear up my ignorance. Had to leave a message each time, but he got back to me within a couple minutes, and was _very_ helpful, knowledgeable, and local, at least to the US. The current can be set on the front panel, but it didn't go to the rated 50amps, so I called. Voltage issue. My inverter welder's output is 140amp @120v VS 150amp @240, and I expected similar with the plasma unit. Not! Higher working voltage limits the amps more.

Support went over the pros and cons of this unit--advised a separate ground connected to the 13 mm lug on the back--I used a jumper to a water pipe--he said this was important. It's briefly mentioned in the manual. He also recommended taking the case off (easy), and checking all connections and fittings. Most were fine, but a few needed tightening. There's a wire standoff for the nozzle--he doesn't use it--said if it is used, to bend it so the orifice is almost touching the work piece. I took it off. Also, put an inline drier on the air supply. I was testing with a small pancake compressor, but kept running out of air. Getting the pressure right is important.

I do homebrewing and got it for cutting beer kegs to make vessels from--16 gage, 1/16" stainless steel. Also for some custom artistic metal work down the road a bit. Again, support said it was old technology, but for my purposes it should work fine.

After making a jig, and digging out my larger compressor, I cut the top off a keg. It worked great! Prior to cutting, I tested on a piece of thick stainless. 25 amps and about 35 psi worked well. I took a 12" circle off the top--had to go back over a couple spots that either didn't get cut, or re-welded together. But pretty clean, quick, did what I wanted. Threw the breaker once, so I backed off from 25 amps to 20. When I went to clean up, fool that I am, I found I'd left the ground clamp on my test piece, and hadn't grounded my work piece! I'm amazed how well it performed anyway!

So far so good. It's what I was hoping for and I'm quite satisfied. Recommended for the home hobbyist.

Most of the consumer Reviews tell that the "Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp" are high quality item. You can read each testimony from consumers to find out cons and pros from Everlast SuperCut 50 110v/220v Inverter Plasma Cutter 50amp ...

Bahco 7-Inch Gardening Knife K-GP-1

You looking to find the "Bahco 7-Inch Gardening Knife K-GP-1" Good news! You can purchase Bahco 7-Inch Gardening Knife K-GP-1 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $25.95 $19.45   

Product Feature

• All purpose, professional grade knife with versatile applications, including pruning and cutting flowers, strings, papers and plastics
• Features a hook-curved blade
• Made of durable stainless steel
• Convenient flat folding design fits easily into pocket
• Tool length: 7 inches

Product Description

The Bahco gardening knife is a high-quality professional grade knife with versatile applications including pruning, flower cutting, and cutting strings, paper and plastics. Featuring a hook-curved blade for easier cutting and a convenient flat folding design to fit easily in the pocket, this useful knife is made of durable stainless steel and measures 7 inches long.

Bahco 7-Inch Gardening Knife K-GP-1 Review

I felt like I wanted/needed a pruning knife but was not particularly interested in paying a lot for one. This knife seemed like a nice compromise, and it is. Both the knife and the handle are stamped out of thick stainless steel plate (hopefully the blade is out of harder stainless than the handle), making a very compact and hopefully durable knife.

The double bevel blade required a quick sharpening, which was not too surprising.

What was surprising was the way the handle seemed to want to cut into my hand. I did not take the time to look under magnification to verify that the stamped edge had a burr, but rounding the edges with a stone quickly improved the way the handle felt in my hand. Even after rounding the edges of the handle, the thinness that makes it easy to fit in a pocket may make it harder to use than a more ergonomic handle.

Most of the consumer Reviews tell that the "Bahco 7-Inch Gardening Knife K-GP-1" are high quality item. You can read each testimony from consumers to find out cons and pros from Bahco 7-Inch Gardening Knife K-GP-1 ...

Boker Bowie Knife Magnum Giant

You looking to find the "Boker Bowie Knife Magnum Giant" Good news! You can purchase Boker Bowie Knife Magnum Giant with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $32.99    

Product Description

A new interpretation of the legendary Vietnam style Bowie, with impressive dimensions. The 8 1/8” 440 stainless steel blade features a precise grinding and is extremely sharp. The guard and pommel are made of polished stainless steel, and the genuine leather handle features soft finger grooves, which tops off the overall look of this classic piece. 12 5/8” overall

Boker Bowie Knife Magnum Giant Review

Have you ever wanted to shove a massive blade through the hood of a car? Do you desire to shatter a brick with the endcap? have you dreamed of chopping through a two by four with the reverse-edge? Do you engage in gratuitous hacking of Meat, Rope and Cardboard?

If so your a stranger person than me, although there is probably a knife maker out there for you that practices in just such events.

that being said this blade doesn't do all that, while it's possible that it COULD, the end result is that there is little call for such actions in this blades use portfolio.

this is a BIG Blade, over a pound of 440 Steel, the edge is a bit soft for my liking but with straight 440 it is to be expected, that being said this blade can take a nasty edge to it and the thrust point is near perfect.

the blade is over seven inches long and the grip is a nice leather/wood combination that fits well in the hand.

In all i would buy this blade again.

Most of the consumer Reviews tell that the "Boker Bowie Knife Magnum Giant" are high quality item. You can read each testimony from consumers to find out cons and pros from Boker Bowie Knife Magnum Giant ...

SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set

You looking to find the "SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set" Good news! You can purchase SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $50.77 $40.95   

Product Feature

• Eight 6-point, fractional impact sockets with 3/8-inch drive
• SureGrip hex design drives the side of the hex, not the corner; nose-down design allows easy access
• Rust-preventative compound and black coating for long life
• Laser-engraved every 120 degrees; conveniently packaged on a rail
• Made in the U.S.A.

Product Description

SKT4078 Features: -Corrosive resistant and laser engraved every 120 degrees.-Extra recess depth and nose down design.-SureGrip® hex design drives the side of the fastener, not the corner.-Made in the U.S.A.. Dimensions: -8 Piece 3/8'' Drive 6 Point SAE Deep Impact Socket Set. Warranty: -Lifetime warranty8 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes then exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120 degrees with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs. Sizes include: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" sockets. .-Sets & Kits do not have warranty/ see individual pcs for details.

SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set Review

An awesome, high quality product at a great price. What more could you ask for? SK Hand Tools rule!!! I especially like the High Visibility size markings on each socket. This great idea has been a long time coming.

Most of the consumer Reviews tell that the "SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set" are high quality item. You can read each testimony from consumers to find out cons and pros from SK Hand Tools 4078 8-Piece 3/8-Inch Drive 6 Point High Visibility Fractional Impact Socket Set ...

Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated

You looking to find the "Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated" Good news! You can purchase Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $56.10    

Product Feature

• Wraps around and holds irregularly-shaped objects quickly and easily, even in difficult places
• Good for oil filters, mufflers, etc
• Flexible heavy duty chain is heat treated for longer life
• Capacity to 6-1/4-inch
• Made in Spain

Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated Review

Great for removing the stubborn oil filter Like it because it works on a great range of diameters. Would recommend highly.

Most of the consumer Reviews tell that the "Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated" are high quality item. You can read each testimony from consumers to find out cons and pros from Grip-On 181-12 12-Inch Chain Clamp Locking Pliers, Nickel-Plated ...

Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit

You looking to find the "Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit" Good news! You can purchase Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $359.95    

Product Feature

• Improved performance--up to 500 (38-percent) more rpm and 50-inches-per-pound (up to 10-percent) of torque than current models
• Single Sleeve 1/2-inch metal chuck for one handed bit changes, increased drill bit capacity for versatile applications
• 25+1 clutch for precise driving applications
• Newly designed handle grip with finger support and two tone soft grip for extended comfort and control
• Variable speed trigger - for complete control

Product Description

18V, Driil & Driver, Brute Tough Drill Driver Kit, Full Metal Clutch Ring With 16 Positions, Ratcheting 1/2" Single Sleeve Chuck With Carbide Teeth, Finger Groove For Optimal Professional Hold, Reverse Switch, Durashield Housing Designed To Withstand Daily Use & Abuse, Bit Holder, 2.0 AH Bosch BlueCore Battery System, Snap Hook, Ergonomic Soft Grip Handle, Variable Speed Soft Grip Trigger, Externally Changeable Brushes, Improved Bosch Design 48mm Motor, Bosch Built Powertrain With All Steel Gears, 2 Batteries & 30 Minute Charger, and carrying case.

Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit Review

I too have purchased high end Bosch tools in the past and have been very happy with all the performance and quality standards set by the name, except for this drill. The first one I purchased actually dropped the low speed position. Pulling the trigger slowly did not do anything, but once I hit the point on the trigger it went superspeed. So I took it back and replaced it (still under warranty). I purchased the same drill thinking it was a bad unit. I really liked the torque, metal clutch, and quick battery charge. Unfortunately, last night while installing a vanity, it started to smoke, and then after I set it down for 5 minutes, I came back and it did not even turn on. I am very disappointed and will return it for a Makita, DeWalt, Milwaukee, or Hitachi.

Most of the consumer Reviews tell that the "Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit" are high quality item. You can read each testimony from consumers to find out cons and pros from Bosch 35618 18-Volt 1/2-Inch Brute Tough Drill/Driver Kit ...

Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder

You looking to find the "Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder" Good news! You can purchase Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $345.00   

Product Feature

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 1/4" in a single pass. With the 30 to 180 Peak Amps
• 6 power setting and Fan cooled

Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder Review

Very happy with the order in all aspects. However, I was truly upset to find that the company that makes the product has been out of business for some time. Parts and warranty are out of the question. Would have been nice to know this before I placed the order for two machines.

Most of the consumer Reviews tell that the "Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder" are high quality item. You can read each testimony from consumers to find out cons and pros from Clarke WE6524 180EN 230-Volt Fluxcore/MIG Welder ...

Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles

You looking to find the "Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles" Good news! You can purchase Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $50.79 $48.16   

Product Feature

• Closed length 3 5/8 inches
• Stainless Blades
• Smooth Chestnut Bone Handles
• Nickel Silver Bolsters and Inlay Shield

Product Description

Case XX Humpback Stockman folding knife. 3 5/8 inches closed length. Surgical Stainless Steel Spear, Spey and Sheepsfoot blades. 63046SS Pattern. Smooth Chestnut Bone handles with nickel silver bolsters and inlay shield. Lifetime Warranty.

Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles Review

I love the smooth chestnut bone it looks like walnut and will last a lot longer being bone.
The knife has a nice feel in my hand.
It reminds me of a knife I had in my hand as a kid but am not sure if is was my Dad's or an Uncle's
I Have look around my house and could not find it but now I have one of my own.

Most of the consumer Reviews tell that the "Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles" are high quality item. You can read each testimony from consumers to find out cons and pros from Case Knives 28706 Humpback Stockman Pocket Knife with Smooth Chestnut Bone Handles ...